"It really works! I can't believe how quickly
the results occurred. The very next morning my 37 gallon tank was
sparkling clear. It
>x>>>
more details >>
A.)
Installed with Hang-On Power Filters, Bio-Wheels or Undergravel Filters.
Circulate tank
water with water pump. Accessories for
installation are included.
Install ECO-Aqualizer
above your tank water level. Submerge only the pump.
Use ME series
( ME25, ME55 , ME125)
B.) Installed with canister
filters
Cut the OUTLET hose on the canister
& simply splice in the ECO-Aqualizer.
ECO-Aqualizer
should be installed in RETURN line back to the
aquarium.
Use X series
(X75, X150, or X225)
C.) Installed
with Biological Sumps
Can be installed
BEFORE
or AFTER any biological sump. Most optimal when
placed after equipment & before entry back to tank
Only ONE
unit is needed per aquarium.
Use X series
(X75 , X150 , or X225)
E.)
Installed
with ECO-System/Refugium
Can be installed
BEFORE
or AFTER the ECO-system sump. Most optimal when
placed after equipment and before entry back into tank.
Only ONE
unit is needed per aquarium.
Use X series
(X75 , X150 , or X225)
G)
Installation of
Multiple Units for Aquariums of 300 to 500 Gallons
Need to Tee off from one of your lines and run parallel ECO units.
Not consecutive. Units must be at least 4 inches away
from each other. Best if return lines can be dropped
back into 2 different inlet areas.
Install
(2) X-150 for 300 gallons. xxx
Install (2) X-225 for
400 - 500 gallons.
xxxxx
